Re: [PATCH v8 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3)

[Johan Hovold]

On Wed, Nov 16, 2022 at 01:22:07PM +0530, Parikshit Pareek wrote:
> Introduce the Qualcomm SA8540P ride automotive platform, also known as
> Qdrive-3 development board.
> 
> This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
> regulators, debug UART, PMICs, remoteprocs and USB.
> 
> The SA8540P ride contains four PM8450 PMICs. A separate DTSI file has
> been created for PMIC, so that it can be used for future SA8540P based
> boards.
> 
> Signed-off-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>

> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17c>;
> +	vcc-max-microamp = <800000>;
> +	vccq-supply = <&vreg_l6c>;
> +	vccq-max-microamp = <900000>;
> +
> +	status = "disabled";
> +};
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l8g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +
> +	status = "disabled";
> +};

Why are these disabled? This should be mentioned somewhere (e.g. commit
message and/or comment) or you can drop the nodes until support is in
place.

Johan