Re: [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: Add PCIe PHYs and controllers nodes

[Konrad Dybcio]

On 16/11/2022 14:04, Abel Vesa wrote:
> Enable PCIe controllers and PHYs nodes on SM8550 MTP board.
>
> Co-developed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 25 +++++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> index d4c8d5b2497e..93a676754666 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> @@ -414,6 +414,31 @@ data-pins {
>   	};
>   };
>   
> +&pcie0 {
> +	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
> +	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};
These references should come before tlmm alphabetically.

Konrad
> +
> +&pcie0_phy {
> +	vdda-phy-supply = <&vreg_l1e_0p88>;
> +	vdda-pll-supply = <&vreg_l3e_1p2>;
> +	status = "okay";
> +};
> +
> +&pcie1 {
> +	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
> +	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};
> +
> +&pcie1_phy {
> +	vdda-phy-supply = <&vreg_l3c_0p91>;
> +	vdda-pll-supply = <&vreg_l3e_1p2>;
> +	vdda-qref-supply = <&vreg_l1e_0p88>;
> +	status = "okay";
> +};
> +
>   &uart7 {
>   	status = "okay";
>   };