Re: [PATCH v3] drm/msm/a6xx: Fix speed-bin detection vs probe-defer

[Akhil P Oommen]

On 11/15/2022 9:16 PM, Rob Clark wrote:
> From: Rob Clark <robdclark@xxxxxxxxxxxx>
>
> If we get an error (other than -ENOENT) we need to propagate that up the
> stack.  Otherwise if the nvmem driver hasn't probed yet, we'll end up
> end up claiming that we support all the OPPs which is not likely to be
> true (and on some generations impossible to be true, ie. if there are
> conflicting OPPs).
>
> v2: Update commit msg, gc unused label, etc
> v3: Add previously missing \n's
>
> Fixed: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu")
> Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
>   drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 +++++-------
>   1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index 7fe60c65a1eb..ebe9599a8316 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -1931,7 +1931,7 @@ static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
>   
>   	if (val == UINT_MAX) {
>   		DRM_DEV_ERROR(dev,
> -			"missing support for speed-bin: %u. Some OPPs may not be supported by hardware",
> +			"missing support for speed-bin: %u. Some OPPs may not be supported by hardware\n",
>   			fuse);
>   		return UINT_MAX;
>   	}
> @@ -1941,7 +1941,7 @@ static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
>   
>   static int a6xx_set_supported_hw(struct device *dev, struct adreno_rev rev)
>   {
> -	u32 supp_hw = UINT_MAX;
> +	u32 supp_hw;
>   	u32 speedbin;
>   	int ret;
>   
> @@ -1953,15 +1953,13 @@ static int a6xx_set_supported_hw(struct device *dev, struct adreno_rev rev)
>   	if (ret == -ENOENT) {
>   		return 0;
>   	} else if (ret) {
> -		DRM_DEV_ERROR(dev,
> -			      "failed to read speed-bin (%d). Some OPPs may not be supported by hardware",
> -			      ret);
> -		goto done;
> +		dev_err_probe(dev, ret,
> +			      "failed to read speed-bin. Some OPPs may not be supported by hardware\n");
> +		return ret;
>   	}
>   
>   	supp_hw = fuse_to_supp_hw(dev, rev, speedbin);
>   
> -done:
>   	ret = devm_pm_opp_set_supported_hw(dev, &supp_hw, 1);
>   	if (ret)
>   		return ret;

Reviewed-by: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>


-Akhil.