Re: [PATCH 4/4] media: i2c: s5c73m3: switch to using gpiod API

[Tommaso Merciai]

On Tue, Nov 15, 2022 at 02:11:45PM -0800, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>  drivers/media/i2c/s5c73m3/s5c73m3-core.c | 63 +++++++-----------------
>  drivers/media/i2c/s5c73m3/s5c73m3.h      |  7 +--
>  2 files changed, 20 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> index 561c1a1583ac..f1e073ed5f99 100644
> --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> @@ -10,12 +10,11 @@
>  #include <linux/clk.h>
>  #include <linux/delay.h>
>  #include <linux/firmware.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/init.h>
>  #include <linux/media.h>
>  #include <linux/module.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_graph.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/sizes.h>
> @@ -1348,20 +1347,20 @@ static int s5c73m3_oif_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>  
>  static int s5c73m3_gpio_set_value(struct s5c73m3 *priv, int id, u32 val)
>  {
> -	if (!gpio_is_valid(priv->gpio[id].gpio))
> +	if (!priv->gpio[id])
>  		return 0;
> -	gpio_set_value(priv->gpio[id].gpio, !!val);
> +	gpiod_set_value_cansleep(priv->gpio[id], val);
>  	return 1;
>  }
>  
>  static int s5c73m3_gpio_assert(struct s5c73m3 *priv, int id)
>  {
> -	return s5c73m3_gpio_set_value(priv, id, priv->gpio[id].level);
> +	return s5c73m3_gpio_set_value(priv, id, 1);
>  }
>  
>  static int s5c73m3_gpio_deassert(struct s5c73m3 *priv, int id)
>  {
> -	return s5c73m3_gpio_set_value(priv, id, !priv->gpio[id].level);
> +	return s5c73m3_gpio_set_value(priv, id, 0);
>  }
>  
>  static int __s5c73m3_power_on(struct s5c73m3 *state)
> @@ -1544,49 +1543,29 @@ static const struct v4l2_subdev_ops oif_subdev_ops = {
>  
>  static int s5c73m3_configure_gpios(struct s5c73m3 *state)
>  {
> -	static const char * const gpio_names[] = {
> -		"S5C73M3_STBY", "S5C73M3_RST"
> -	};
> +	static const char * const name[] = { "standby", "xshutdown" };
> +	static const char * const label[] = { "S5C73M3_STBY", "S5C73M3_RST" };
>  	struct i2c_client *c = state->i2c_client;
> -	struct s5c73m3_gpio *g = state->gpio;
> +	struct gpio_desc *gpio;
>  	int ret, i;
>  
>  	for (i = 0; i < GPIO_NUM; ++i) {
> -		unsigned int flags = GPIOF_DIR_OUT;
> -		if (g[i].level)
> -			flags |= GPIOF_INIT_HIGH;
> -		ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags,
> -					    gpio_names[i]);
> +		gpio = devm_gpiod_get(&c->dev, name[i], GPIOD_OUT_HIGH);
> +		ret = PTR_ERR_OR_ZERO(gpio);
>  		if (ret) {
> -			v4l2_err(c, "failed to request gpio %s\n",
> -				 gpio_names[i]);
> +			v4l2_err(c, "failed to request gpio %s: %d\n",
> +				 name[i], ret);
>  			return ret;
>  		}
> -	}
> -	return 0;
> -}
> -
> -static int s5c73m3_parse_gpios(struct s5c73m3 *state)
> -{
> -	static const char * const prop_names[] = {
> -		"standby-gpios", "xshutdown-gpios",
> -	};
> -	struct device *dev = &state->i2c_client->dev;
> -	struct device_node *node = dev->of_node;
> -	int ret, i;
>  
> -	for (i = 0; i < GPIO_NUM; ++i) {
> -		enum of_gpio_flags of_flags;
> -
> -		ret = of_get_named_gpio_flags(node, prop_names[i],
> -					      0, &of_flags);
> -		if (ret < 0) {
> -			dev_err(dev, "failed to parse %s DT property\n",
> -				prop_names[i]);
> -			return -EINVAL;
> +		ret = gpiod_set_consumer_name(gpio, label[i]);
> +		if (ret) {
> +			v4l2_err(c, "failed to set up name for gpio %s: %d\n",
> +				 name[i], ret);
> +			return ret;
>  		}
> -		state->gpio[i].gpio = ret;
> -		state->gpio[i].level = !(of_flags & OF_GPIO_ACTIVE_LOW);
> +
> +		state->gpio[i] = gpio;
>  	}
>  	return 0;
>  }
> @@ -1613,10 +1592,6 @@ static int s5c73m3_get_dt_data(struct s5c73m3 *state)
>  					state->mclk_frequency);
>  	}
>  
> -	ret = s5c73m3_parse_gpios(state);
> -	if (ret < 0)
> -		return -EINVAL;
> -
>  	node_ep = of_graph_get_next_endpoint(node, NULL);
>  	if (!node_ep) {
>  		dev_warn(dev, "no endpoint defined for node: %pOF\n", node);
> diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
> index d68528898249..9887d03fcdeb 100644
> --- a/drivers/media/i2c/s5c73m3/s5c73m3.h
> +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
> @@ -356,11 +356,6 @@ enum s5c73m3_gpio_id {
>  	GPIO_NUM,
>  };
>  
> -struct s5c73m3_gpio {
> -	int gpio;
> -	int level;
> -};
> -
>  enum s5c73m3_resolution_types {
>  	RES_ISP,
>  	RES_JPEG,
> @@ -387,7 +382,7 @@ struct s5c73m3 {
>  	u32 i2c_read_address;
>  
>  	struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES];
> -	struct s5c73m3_gpio gpio[GPIO_NUM];
> +	struct gpio_desc *gpio[GPIO_NUM];
>  
>  	struct clk *clock;
>  
> -- 
> 2.38.1.431.g37b22c650d-goog
> 

Looks good to me.
Reviewed-by: Tommaso Merciai <tommaso.merciai@xxxxxxxxxxxxxxxxxxxx>

-- 
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai@xxxxxxxxxxxxxxxxxxxx
__________________________________

Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@xxxxxxxxxxxxxxxxxxxx
www.amarulasolutions.com