Re: [PATCH RFC 2/5] pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts

[Geert Uytterhoeven]

Hi Prabhakar,

On Mon, Nov 7, 2022 at 6:53 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
> the pin configs are completely different. This patch makes sure we use the
> appropriate pin configs for each SoC (which is passed as part of the OF
> data) while configuring the GPIO pin as interrupts instead of using
> rzg2l_gpio_configs[] for all the SoCs.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Thanks for your patch!

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
But I do think there is room for improvement...

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -127,6 +127,7 @@ struct rzg2l_dedicated_configs {
>  struct rzg2l_pinctrl_data {
>         const char * const *port_pins;
>         const u32 *port_pin_configs;
> +       unsigned int n_port_pin_configs;

n_ports?

>         struct rzg2l_dedicated_configs *dedicated_pins;
>         unsigned int n_port_pins;

n_port_pins is now always n_port_pin_configs * RZG2L_PINS_PER_PORT,
right?

>         unsigned int n_dedicated_pins;

> @@ -1517,6 +1518,7 @@ static int rzg2l_pinctrl_probe(struct platform_device *pdev)
>  static struct rzg2l_pinctrl_data r9a07g043_data = {
>         .port_pins = rzg2l_gpio_names,
>         .port_pin_configs = r9a07g043_gpio_configs,
> +       .n_port_pin_configs = ARRAY_SIZE(r9a07g043_gpio_configs),
>         .dedicated_pins = rzg2l_dedicated_pins.common,
>         .n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT,
>         .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common),
> @@ -1525,6 +1527,7 @@ static struct rzg2l_pinctrl_data r9a07g043_data = {
>  static struct rzg2l_pinctrl_data r9a07g044_data = {
>         .port_pins = rzg2l_gpio_names,

.port_pins is always rzg2l_gpio_names

>         .port_pin_configs = rzg2l_gpio_configs,
> +       .n_port_pin_configs = ARRAY_SIZE(rzg2l_gpio_configs),
>         .dedicated_pins = rzg2l_dedicated_pins.common,
>         .n_port_pins = ARRAY_SIZE(rzg2l_gpio_names),

I think this should have become
ARRAY_SIZE(rzg2l_gpio_configs) * RZG2L_PINS_PER_PORT)
when support for r9a07g043 was introduced.

To avoid overflows when adding support for more SoCs, you can add a
bunch of checks like

    BUILD_BUG_ON(ARRAY_SIZE(r9a07g043_gpio_configs) *
RZG2L_PINS_PER_PORT > ARRAY_SIZE(rzg2l_gpio_names))
    BUILD_BUG_ON(ARRAY_SIZE(rzg2l_gpio_configs) * RZG2L_PINS_PER_PORT
> ARRAY_SIZE(rzg2l_gpio_names))

>         .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common) +

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds