пт, 18 нояб. 2022 г. в 12:27, Paul Cercueil <paul@xxxxxxxxxxxxxxx>:
Hi,
(Ingenic SoCs maintainer here)
Le ven. 18 nov. 2022 à 09:45:48 +0100, Ulf Hansson
<ulf.hansson@xxxxxxxxxx> a écrit :
> On Tue, 8 Nov 2022 at 05:53, Siarhei Volkau <lis8215@xxxxxxxxx> wrote:
>>
>> Some SoCs have one clock divider for all MMC units, thus changing
>> one
>> affects others as well. This leads to random hangs and memory
>> corruptions, observed on the JZ4755 based device with two MMC slots
>> used at the same time.
>
> Urgh, that sounds like broken HW to me.
>
> The MMC blocks could share a parent clock (that would need a fixed
> rate for it to be applied), assuming there is a separate gate/divider
> available per block. But there isn't'?
They do share a parent clock and have separate gates, and each MMC IP
block has an internal divider for the bus frequency derived from that
shared clock.
>>
>> List of SoCs affected includes: JZ4725b, JZ4755, JZ4760 and JZ4760b.
>> However, the MMC driver doesn't distinguish JZ4760 and JZ4770
>> which shall remain its behavior. For the JZ4755 is sufficient to
>> use JZ4725b's binding. JZ4750 is outside of the patch.
>>
>> The MMC core has its own clock divisor, rather coarse but suitable
>> well,
>> and it shall keep the role of tuning clock for the MMC host in that
>> case.
>
> The mmc core doesn't have a clock divisor, but it does control the bus
> clock frequency through the ->set_ios() host ops. It needs to do that,
> to be able to conform to the (e)MMC, SD and SDIO specifications.
>
> Can you please try to elaborate on the above, so I can better
> understand your point?
Yes, I don't really understand the patch, TBH.
The "clk_set_rate" call will only set the shared clock to the *maximum*
clock frequency (host->mmc->f_max) which should be the exact same
across all MMC IPs.
That's the case I need different "f_max" for my HW, for some reason
internal slot can't do a full rate (48MHz) but the external can, the same
card used for checking. So I want to set 24M for mmc0, and 48M for mmc1
with respect to hardware limitation.
So it doesn't matter if it's set 3 times by 3 different instances of
the IP, as long as they all request the same value.
Besides, I know for a fact that the mainline driver works fine on the
JZ4760(B) and JZ4725B.
Finally... even if it was correct, this change would break
compatibility with old Device Tree files.
Cheers,
-Paul
>>
>> Signed-off-by: Siarhei Volkau <lis8215@xxxxxxxxx>
>
> Kind regards
> Uffe
>
>> ---
>> drivers/mmc/host/jz4740_mmc.c | 10 +++++++++-
>> 1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/jz4740_mmc.c
>> b/drivers/mmc/host/jz4740_mmc.c
>> index dc2db9c18..d390ff31d 100644
>> --- a/drivers/mmc/host/jz4740_mmc.c
>> +++ b/drivers/mmc/host/jz4740_mmc.c
>> @@ -114,6 +114,7 @@ enum jz4740_mmc_version {
>> JZ_MMC_JZ4740,
>> JZ_MMC_JZ4725B,
>> JZ_MMC_JZ4760,
>> + JZ_MMC_JZ4770,
>> JZ_MMC_JZ4780,
>> JZ_MMC_X1000,
>> };
>> @@ -887,7 +888,13 @@ static int jz4740_mmc_set_clock_rate(struct
>> jz4740_mmc_host *host, int rate)
>> int real_rate;
>>
>> jz4740_mmc_clock_disable(host);
>> - clk_set_rate(host->clk, host->mmc->f_max);
>> +
>> + /*
>> + * Changing rate on these SoCs affects other MMC units too.
>> + * Make sure the rate is configured properly by the CGU
>> driver.
>> + */
>> + if (host->version != JZ_MMC_JZ4725B && host->version !=
>> JZ_MMC_JZ4760)
>> + clk_set_rate(host->clk, host->mmc->f_max);
>>
>> real_rate = clk_get_rate(host->clk);
>>
>> @@ -992,6 +999,7 @@ static const struct of_device_id
>> jz4740_mmc_of_match[] = {
>> { .compatible = "ingenic,jz4740-mmc", .data = (void *)
>> JZ_MMC_JZ4740 },
>> { .compatible = "ingenic,jz4725b-mmc", .data = (void
>> *)JZ_MMC_JZ4725B },
>> { .compatible = "ingenic,jz4760-mmc", .data = (void *)
>> JZ_MMC_JZ4760 },
>> + { .compatible = "ingenic,jz4770-mmc", .data = (void *)
>> JZ_MMC_JZ4770 },
>> { .compatible = "ingenic,jz4775-mmc", .data = (void *)
>> JZ_MMC_JZ4780 },
>> { .compatible = "ingenic,jz4780-mmc", .data = (void *)
>> JZ_MMC_JZ4780 },
>> { .compatible = "ingenic,x1000-mmc", .data = (void *)
>> JZ_MMC_X1000 },
>> --
>> 2.36.1
>>