[PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Configure SLG51000 PMIC on PDX215

[Konrad Dybcio]

Remove the mention of this PMIC from the common DTSI, as it's not
used on PDX214. Add the required nodes to support it on PDX215.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 .../qcom/sm8350-sony-xperia-sagami-pdx215.dts | 66 +++++++++++++++++++
 .../dts/qcom/sm8350-sony-xperia-sagami.dtsi   |  2 +-
 2 files changed, 67 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
index c74c973a69d2..d4afaa393c9a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -12,6 +12,72 @@ / {
 	compatible = "sony,pdx215-generic", "qcom,sm8350";
 };
 
+&i2c13 {
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_a_cs>;
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&pm8350b_gpios {
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio1";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-high;
+	};
+};
+
 &tlmm {
 	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
 			  "APPS_I2C_0_SCL",
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 6ae700e72d1e..8f32b2799bcb 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
  */
 
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 #include "pm8350.dtsi"
@@ -506,7 +507,6 @@ &i2c13 {
 	clock-frequency = <100000>;
 
 	/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
-	/* Dialog SLG51000 CMIC @ 75 */
 };
 
 &i2c15 {
-- 
2.38.1