Re: [PATCH] MIPS: DTS: CI20: fix reset line polarity of the ethernet controller

[Paul Cercueil]

Hi Dmitry,

Le ven. 18 nov. 2022 à 08:43:47 -0800, Dmitry Torokhov 
<dmitry.torokhov@xxxxxxxxx> a écrit :
> The reset line is called PWRST#, annotated as "active low" in the
> binding documentation, and is driven low and then high by the driver 
> to
> reset the chip. However in device tree for CI20 board it was 
> incorrectly
> marked as "active high". Fix it.
>
> Because (as far as I know) the ci20.dts is always built in the kernel 
> I
> elected not to also add a quirk to gpiolib to force the polarity 
> there.
>
> Fixes: db49ca38579d ("net: davicom: dm9000: switch to using gpiod 
> API")
> Reported-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Acked-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Thanks.

Cheers,
-Paul

> ---
>  arch/mips/boot/dts/ingenic/ci20.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts 
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 37c46720c719..f38c39572a9e 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> @@ -438,7 +438,7 @@ dm9000@6 {
>  		ingenic,nemc-tAW = <50>;
>  		ingenic,nemc-tSTRV = <100>;
>
> -		reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
>  		vcc-supply = <&eth0_power>;
>
>  		interrupt-parent = <&gpe>;
> --
> 2.38.1.584.g0f3c55d4c2-goog
>
>
> --
> Dmitry