Re: [PATCH v3 5/9] cxl/pci: Only register RCDs with device 0, function 0 as CXL memory device

[Dan Williams]

Robert Richter wrote:
> On 17.11.22 09:27:23, Dan Williams wrote:
> > Robert Richter wrote:
> > > On 16.11.22 11:24:48, Dan Williams wrote:
> > > > Robert Richter wrote:
> > > > > The Device 0, Function 0 DVSEC controls the CXL functionality of the
> > > > > entire device. Add a check to prevent registration of any other PCI
> > > > > device on the bus as a CXL memory device.
> > > > 
> > > > Can you reference the specification wording that indicates that the OS
> > > > needs to actively avoid these situations, or otherwise point to the real
> > > > world scenario where this filtering is needed?
> > > 
> > > CXL 3.0
> > > 
> > > 8.1.3 PCIe DVSEC for CXL Device
> > > 
> > > """
> > > An RCD creates a new PCIe enumeration hierarchy. As such, it spawns a new Root Bus
> > > and can expose one or more PCIe device numbers and function numbers at this bus
> > > number. These are exposed as Root Complex Integrated Endpoints (RCiEP). The PCIe
> > > Configuration Space of Device 0, Function 0 shall include the CXL PCIe DVSEC as shown
> > > in Figure 8-1.
> > > """
> > > 
> > > """
> > > In either case, the capability, status, and control fields in Device 0, Function 0 DVSEC
> > > control the CXL functionality of the entire device.
> > > """
> > > 
> > > There are some other occurrences. I think this is even true for VH
> > > mode, as multiple CXL devices on the bus are exposed through multiple
> > > DSPs or Root Ports.
> > > 
> > > Anyway, I limited this to an RCD only, esp. because its counterpart
> > > would be missing and thus port mapping would fail otherwise. See
> > > restricted_host_enumerate_dport() of this series.
> > > 
> > > > 
> > > > > 
> > > > > Signed-off-by: Robert Richter <rrichter@xxxxxxx>
> > > > > ---
> > > > >  drivers/cxl/pci.c | 25 +++++++++++++++++++++++--
> > > > >  1 file changed, 23 insertions(+), 2 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> > > > > index faeb5d9d7a7a..cc4f206f24b3 100644
> > > > > --- a/drivers/cxl/pci.c
> > > > > +++ b/drivers/cxl/pci.c
> > > > > @@ -428,11 +428,26 @@ static void devm_cxl_pci_create_doe(struct cxl_dev_state *cxlds)
> > > > >  	}
> > > > >  }
> > > > >  
> > > > > +static int check_restricted_device(struct pci_dev *pdev, u16 pcie_dvsec)
> > > > > +{
> > > > > +	if (pci_pcie_type(pdev) != PCI_EXP_TYPE_RC_END)
> > > > > +		return 0;		/* no RCD */
> > > > > +
> > > > > +	if (pdev->devfn == PCI_DEVFN(0, 0) && pcie_dvsec)
> > > > > +		return 0;		/* ok */
> > > > > +
> > > > > +	dev_warn(&pdev->dev, "Skipping RCD: devfn=0x%02x dvsec=%u\n",
> > > > 
> > > > s/0x%02x/%#02x/
> > > > 
> > > > > +		pdev->devfn, pcie_dvsec);
> > > 
> > > Ok.
> > > 
> > > > This looks like a dev_dbg() to me. Otherwise a warning will always fire
> > > > on a benign condition.
> > > 
> > > I have chosen dev_warn() here as this is a non-compliant unexpected
> > > behavior of the device. There are no (legal) cases this may happen. I
> > > suppose you are worried about spamming the console here, but that
> > > error should be reported somewhere and thus being visible.
> > 
> > There are so many spec illegal values and conditions that the driver
> > could checki, but does not. The reason I am poking here is why does the
> > driver need to be explicit about *this* illegal condition versus all the
> > other potential conditions? What is the practical end user impact if
> > Linux does not include this change? For example, if it is just one
> > vendor that made this mistake that can be an explicit quirk.
> > 
> > A dev_warn() is not necessary for simple quirks.
> 
> This is not simply a cross check, the driver prevents enablement of
> CXL mem devs other than PCI_DEVFN(0, 0). It shouldn't silently drop
> out then. It's a device malfunction which should appropriate reported
> and not only visible if dbg is enabled.
> 
> As written above, the check is necessary as the counterpart is missing

It is only necessary if this condition happens in practice, not a
theoretically. So I am asking, are you seeing this with an actual device
that someone will use in production? If so, that's what pci quirks are
for to keep those workarounds organized in a common location.