[RFC Patch net-next v2 2/8] net: dsa: microchip: adding the posix clock support
From: Arun Ramadoss
Date: Mon Nov 21 2022 - 10:42:48 EST
This patch implement routines (adjfine, adjtime, gettime and settime)
for manipulating the chip's PTP clock. It registers the ptp caps
to posix clock register.
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
---
drivers/net/dsa/microchip/Kconfig | 12 ++
drivers/net/dsa/microchip/Makefile | 5 +
drivers/net/dsa/microchip/ksz_common.c | 14 +-
drivers/net/dsa/microchip/ksz_common.h | 17 ++
drivers/net/dsa/microchip/ksz_ptp.c | 270 ++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_ptp.h | 43 ++++
drivers/net/dsa/microchip/ksz_ptp_reg.h | 52 +++++
7 files changed, 412 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/dsa/microchip/ksz_ptp.c
create mode 100644 drivers/net/dsa/microchip/ksz_ptp.h
create mode 100644 drivers/net/dsa/microchip/ksz_ptp_reg.h
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 06b1efdb5e7d..a1a3a04d0ea2 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -10,6 +10,7 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON
config NET_DSA_MICROCHIP_KSZ9477_I2C
tristate "KSZ series I2C connected switch driver"
depends on NET_DSA_MICROCHIP_KSZ_COMMON && I2C
+ depends on PTP_1588_CLOCK_OPTIONAL
select REGMAP_I2C
help
Select to enable support for registering switches configured through I2C.
@@ -17,10 +18,21 @@ config NET_DSA_MICROCHIP_KSZ9477_I2C
config NET_DSA_MICROCHIP_KSZ_SPI
tristate "KSZ series SPI connected switch driver"
depends on NET_DSA_MICROCHIP_KSZ_COMMON && SPI
+ depends on PTP_1588_CLOCK_OPTIONAL
select REGMAP_SPI
help
Select to enable support for registering switches configured through SPI.
+config NET_DSA_MICROCHIP_KSZ_PTP
+ bool "Support for the PTP clock on the KSZ9563/LAN937x Ethernet Switch"
+ depends on NET_DSA_MICROCHIP_KSZ_COMMON && PTP_1588_CLOCK
+ help
+ This enables support for timestamping & PTP clock manipulation
+ in the KSZ9563/LAN937x Ethernet switch
+
+ Select to enable support for PTP feature for KSZ9563/lan937x series
+ of switch.
+
config NET_DSA_MICROCHIP_KSZ8863_SMI
tristate "KSZ series SMI connected switch driver"
depends on NET_DSA_MICROCHIP_KSZ_COMMON
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 28873559efc2..48360cc9fc68 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -4,6 +4,11 @@ ksz_switch-objs := ksz_common.o
ksz_switch-objs += ksz9477.o
ksz_switch-objs += ksz8795.o
ksz_switch-objs += lan937x_main.o
+
+ifdef CONFIG_NET_DSA_MICROCHIP_KSZ_PTP
+ksz_switch-objs += ksz_ptp.o
+endif
+
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C) += ksz9477_i2c.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_SPI) += ksz_spi.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI) += ksz8863_smi.o
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8c8db315317d..eb77eca0dcb2 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -27,6 +27,7 @@
#include "ksz8.h"
#include "ksz9477.h"
#include "lan937x.h"
+#include "ksz_ptp.h"
#define MIB_COUNTER_NUM 0x20
@@ -2016,10 +2017,16 @@ static int ksz_setup(struct dsa_switch *ds)
}
}
+ ret = ksz_ptp_clock_register(ds);
+ if (ret) {
+ dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret);
+ goto out_pirq;
+ }
+
ret = ksz_mdio_register(dev);
if (ret < 0) {
dev_err(dev->dev, "failed to register the mdio");
- goto out_pirq;
+ goto out_ptp_clock_unregister;
}
/* start switch */
@@ -2028,6 +2035,8 @@ static int ksz_setup(struct dsa_switch *ds)
return 0;
+out_ptp_clock_unregister:
+ ksz_ptp_clock_unregister(ds);
out_pirq:
if (dev->irq > 0)
dsa_switch_for_each_user_port(dp, dev->ds)
@@ -2044,6 +2053,8 @@ static void ksz_teardown(struct dsa_switch *ds)
struct ksz_device *dev = ds->priv;
struct dsa_port *dp;
+ ksz_ptp_clock_unregister(ds);
+
if (dev->irq > 0) {
dsa_switch_for_each_user_port(dp, dev->ds)
ksz_irq_free(&dev->ports[dp->index].pirq);
@@ -2861,6 +2872,7 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.get_pause_stats = ksz_get_pause_stats,
.port_change_mtu = ksz_change_mtu,
.port_max_mtu = ksz_max_mtu,
+ .get_ts_info = ksz_get_ts_info,
};
struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c6726cbd5465..767f17d2c75d 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -14,6 +14,9 @@
#include <linux/regmap.h>
#include <net/dsa.h>
#include <linux/irq.h>
+#include <linux/ptp_clock_kernel.h>
+
+#include "ksz_ptp.h"
#define KSZ_MAX_NUM_PORTS 8
@@ -141,6 +144,7 @@ struct ksz_device {
u16 port_mask;
struct mutex lock_irq; /* IRQ Access */
struct ksz_irq girq;
+ struct ksz_ptp_data ptp_data;
};
/* List of supported models */
@@ -444,6 +448,19 @@ static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
return ret;
}
+static inline int ksz_rmw16(struct ksz_device *dev, u32 reg, u16 mask,
+ u16 value)
+{
+ int ret;
+
+ ret = regmap_update_bits(dev->regmap[1], reg, mask, value);
+ if (ret)
+ dev_err(dev->dev, "can't rmw 16bit reg: 0x%x %pe\n", reg,
+ ERR_PTR(ret));
+
+ return ret;
+}
+
static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
{
u32 val[2];
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
new file mode 100644
index 000000000000..cad0c6087419
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Microchip LAN937X PTP Implementation
+ * Copyright (C) 2021-2022 Microchip Technology Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ptp_classify.h>
+#include <linux/ptp_clock_kernel.h>
+
+#include "ksz_common.h"
+#include "ksz_ptp.h"
+#include "ksz_ptp_reg.h"
+
+#define ptp_caps_to_data(d) \
+ container_of((d), struct ksz_ptp_data, caps)
+#define ptp_data_to_ksz_dev(d) \
+ container_of((d), struct ksz_device, ptp_data)
+
+#define MAX_DRIFT_CORR 6250000
+
+#define KSZ_PTP_INC_NS 40 /* HW clock is incremented every 40 ns (by 40) */
+#define KSZ_PTP_SUBNS_BITS 32 /* Number of bits in sub-nanoseconds counter */
+
+/* The function is return back the capability of timestamping feature when
+ * requested through ethtool -T <interface> utility
+ */
+int ksz_get_ts_info(struct dsa_switch *ds, int port, struct ethtool_ts_info *ts)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_ptp_data *ptp_data = &dev->ptp_data;
+
+ ts->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+
+ ts->tx_types = (1 << HWTSTAMP_TX_OFF);
+
+ ts->rx_filters = (1 << HWTSTAMP_FILTER_NONE);
+
+ ts->phc_index = ptp_clock_index(ptp_data->clock);
+
+ return 0;
+}
+
+/* These are function related to the ptp clock info */
+static int _ksz_ptp_gettime(struct ksz_device *dev, struct timespec64 *ts)
+{
+ u32 nanoseconds;
+ u32 seconds;
+ u8 phase;
+ int ret;
+
+ /* Copy current PTP clock into shadow registers */
+ ret = ksz_rmw16(dev, REG_PTP_CLK_CTRL, PTP_READ_TIME, PTP_READ_TIME);
+ if (ret)
+ return ret;
+
+ /* Read from shadow registers */
+ ret = ksz_read8(dev, REG_PTP_RTC_SUB_NANOSEC__2, &phase);
+ if (ret)
+ return ret;
+
+ ret = ksz_read32(dev, REG_PTP_RTC_NANOSEC, &nanoseconds);
+ if (ret)
+ return ret;
+
+ ret = ksz_read32(dev, REG_PTP_RTC_SEC, &seconds);
+ if (ret)
+ return ret;
+
+ ts->tv_sec = seconds;
+ ts->tv_nsec = nanoseconds + phase * 8;
+
+ return 0;
+}
+
+static int ksz_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+ struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
+ struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
+ int ret;
+
+ mutex_lock(&ptp_data->lock);
+ ret = _ksz_ptp_gettime(dev, ts);
+ mutex_unlock(&ptp_data->lock);
+
+ return ret;
+}
+
+static int ksz_ptp_settime(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
+ struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
+ int ret;
+
+ mutex_lock(&ptp_data->lock);
+
+ /* Write to shadow registers */
+
+ /* Write 0 to clock phase */
+ ret = ksz_write16(dev, REG_PTP_RTC_SUB_NANOSEC__2, PTP_RTC_0NS);
+ if (ret)
+ goto error_return;
+
+ /* nanoseconds */
+ ret = ksz_write32(dev, REG_PTP_RTC_NANOSEC, ts->tv_nsec);
+ if (ret)
+ goto error_return;
+
+ /* seconds */
+ ret = ksz_write32(dev, REG_PTP_RTC_SEC, ts->tv_sec);
+ if (ret)
+ goto error_return;
+
+ /* Load PTP clock from shadow registers */
+ ret = ksz_rmw16(dev, REG_PTP_CLK_CTRL, PTP_LOAD_TIME, PTP_LOAD_TIME);
+
+error_return:
+ mutex_unlock(&ptp_data->lock);
+
+ return ret;
+}
+
+static int ksz_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+ struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
+ struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
+ int ret;
+
+ mutex_lock(&ptp_data->lock);
+
+ if (scaled_ppm) {
+ s64 ppb, adj;
+ u32 data32;
+
+ /* see scaled_ppm_to_ppb() in ptp_clock.c for details */
+ ppb = 1 + scaled_ppm;
+ ppb *= 125;
+ ppb *= KSZ_PTP_INC_NS;
+ ppb <<= KSZ_PTP_SUBNS_BITS - 13;
+ adj = div_s64(ppb, NSEC_PER_SEC);
+
+ data32 = abs(adj);
+ data32 &= PTP_SUBNANOSEC_M;
+ if (adj >= 0)
+ data32 |= PTP_RATE_DIR;
+
+ ret = ksz_write32(dev, REG_PTP_SUBNANOSEC_RATE, data32);
+ if (ret)
+ goto error_return;
+
+ ret = ksz_rmw16(dev, REG_PTP_CLK_CTRL, PTP_CLK_ADJ_ENABLE,
+ PTP_CLK_ADJ_ENABLE);
+ if (ret)
+ goto error_return;
+ } else {
+ ret = ksz_rmw16(dev, REG_PTP_CLK_CTRL, PTP_CLK_ADJ_ENABLE, 0);
+ if (ret)
+ goto error_return;
+ }
+
+error_return:
+ mutex_unlock(&ptp_data->lock);
+ return ret;
+}
+
+static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
+ struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
+ s32 sec, nsec;
+ u16 data16;
+ int ret;
+
+ mutex_lock(&ptp_data->lock);
+
+ /* do not use ns_to_timespec64(),
+ * both sec and nsec are subtracted by hw
+ */
+ sec = div_s64_rem(delta, NSEC_PER_SEC, &nsec);
+
+ ret = ksz_write32(dev, REG_PTP_RTC_NANOSEC, abs(nsec));
+ if (ret)
+ goto error_return;
+
+ ret = ksz_write32(dev, REG_PTP_RTC_SEC, abs(sec));
+ if (ret)
+ goto error_return;
+
+ ret = ksz_read16(dev, REG_PTP_CLK_CTRL, &data16);
+ if (ret)
+ goto error_return;
+
+ data16 |= PTP_STEP_ADJ;
+
+ /*PTP_STEP_DIR -- 0: subtract, 1: add */
+ if (delta < 0)
+ data16 &= ~PTP_STEP_DIR;
+ else
+ data16 |= PTP_STEP_DIR;
+
+ ret = ksz_write16(dev, REG_PTP_CLK_CTRL, data16);
+
+error_return:
+ mutex_unlock(&ptp_data->lock);
+ return ret;
+}
+
+static int ksz_ptp_start_clock(struct ksz_device *dev)
+{
+ return ksz_rmw16(dev, REG_PTP_CLK_CTRL, PTP_CLK_ENABLE, PTP_CLK_ENABLE);
+}
+
+static const struct ptp_clock_info ksz_ptp_caps = {
+ .owner = THIS_MODULE,
+ .name = "Microchip Clock",
+ .max_adj = MAX_DRIFT_CORR,
+ .gettime64 = ksz_ptp_gettime,
+ .settime64 = ksz_ptp_settime,
+ .adjfine = ksz_ptp_adjfine,
+ .adjtime = ksz_ptp_adjtime,
+};
+
+int ksz_ptp_clock_register(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_ptp_data *ptp_data = &dev->ptp_data;
+ int ret;
+
+ mutex_init(&ptp_data->lock);
+
+ ptp_data->caps = ksz_ptp_caps;
+
+ /* Start hardware counter */
+ ret = ksz_ptp_start_clock(dev);
+ if (ret)
+ return ret;
+
+ /* Register the PTP Clock */
+ ptp_data->clock = ptp_clock_register(&ptp_data->caps, dev->dev);
+ if (IS_ERR_OR_NULL(ptp_data->clock))
+ return PTR_ERR(ptp_data->clock);
+
+ ret = ksz_rmw16(dev, REG_PTP_MSG_CONF1, PTP_802_1AS, PTP_802_1AS);
+ if (ret)
+ goto error_unregister_clock;
+
+ return 0;
+
+error_unregister_clock:
+ ptp_clock_unregister(ptp_data->clock);
+ return ret;
+}
+
+void ksz_ptp_clock_unregister(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_ptp_data *ptp_data = &dev->ptp_data;
+
+ if (IS_ERR_OR_NULL(ptp_data->clock))
+ return;
+
+ ptp_clock_unregister(ptp_data->clock);
+}
+
+MODULE_AUTHOR("Christian Eggers <ceggers@xxxxxxx>");
+MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PTP support for KSZ switch");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h
new file mode 100644
index 000000000000..ac53b0df2733
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_ptp.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Microchip LAN937X PTP Implementation
+ * Copyright (C) 2020-2021 Microchip Technology Inc.
+ */
+
+#ifndef _NET_DSA_DRIVERS_KSZ_PTP_H
+#define _NET_DSA_DRIVERS_KSZ_PTP_H
+
+#if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP)
+
+struct ksz_ptp_data {
+ struct ptp_clock_info caps;
+ struct ptp_clock *clock;
+ /* Serializes all operations on the PTP hardware clock */
+ struct mutex lock;
+};
+
+int ksz_ptp_clock_register(struct dsa_switch *ds);
+
+void ksz_ptp_clock_unregister(struct dsa_switch *ds);
+
+int ksz_get_ts_info(struct dsa_switch *ds, int port,
+ struct ethtool_ts_info *ts);
+
+#else
+
+struct ksz_ptp_data {
+ /* Serializes all operations on the PTP hardware clock */
+ struct mutex lock;
+};
+
+static inline int ksz_ptp_clock_register(struct dsa_switch *ds)
+{
+ return 0;
+}
+
+static inline void ksz_ptp_clock_unregister(struct dsa_switch *ds) { }
+
+#define ksz_get_ts_info NULL
+
+#endif /* End of CONFIG_NET_DSA_MICROCHIOP_KSZ_PTP */
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz_ptp_reg.h b/drivers/net/dsa/microchip/ksz_ptp_reg.h
new file mode 100644
index 000000000000..2bf8395475b9
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_ptp_reg.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Microchip KSZ PTP register definitions
+ * Copyright (C) 2019-2021 Microchip Technology Inc.
+ */
+
+/* 5 - PTP Clock */
+#define REG_PTP_CLK_CTRL 0x0500
+
+#define PTP_STEP_ADJ BIT(6)
+#define PTP_STEP_DIR BIT(5)
+#define PTP_READ_TIME BIT(4)
+#define PTP_LOAD_TIME BIT(3)
+#define PTP_CLK_ADJ_ENABLE BIT(2)
+#define PTP_CLK_ENABLE BIT(1)
+#define PTP_CLK_RESET BIT(0)
+
+#define REG_PTP_RTC_SUB_NANOSEC__2 0x0502
+
+#define PTP_RTC_SUB_NANOSEC_M 0x0007
+#define PTP_RTC_0NS 0x00
+
+#define REG_PTP_RTC_NANOSEC 0x0504
+#define REG_PTP_RTC_NANOSEC_H 0x0504
+#define REG_PTP_RTC_NANOSEC_L 0x0506
+
+#define REG_PTP_RTC_SEC 0x0508
+#define REG_PTP_RTC_SEC_H 0x0508
+#define REG_PTP_RTC_SEC_L 0x050A
+
+#define REG_PTP_SUBNANOSEC_RATE 0x050C
+#define REG_PTP_SUBNANOSEC_RATE_H 0x050C
+#define PTP_SUBNANOSEC_M 0x3FFFFFFF
+
+#define PTP_RATE_DIR BIT(31)
+#define PTP_TMP_RATE_ENABLE BIT(30)
+
+#define REG_PTP_SUBNANOSEC_RATE_L 0x050E
+
+#define REG_PTP_RATE_DURATION 0x0510
+#define REG_PTP_RATE_DURATION_H 0x0510
+#define REG_PTP_RATE_DURATION_L 0x0512
+
+#define REG_PTP_MSG_CONF1 0x0514
+
+#define PTP_802_1AS BIT(7)
+#define PTP_ENABLE BIT(6)
+#define PTP_ETH_ENABLE BIT(5)
+#define PTP_IPV4_UDP_ENABLE BIT(4)
+#define PTP_IPV6_UDP_ENABLE BIT(3)
+#define PTP_TC_P2P BIT(2)
+#define PTP_MASTER BIT(1)
+#define PTP_1STEP BIT(0)
--
2.36.1