[PATCH] drm/msm/dpu: Print interrupt index in addition to the mask

[Marijn Suijten]

The mask only describes the `irq_idx % 32` part, making it generally
impossible to deduce what interrupt is being enabled/disabled.  Since
`debug/core_irq` in debugfs (and other prints) also include the full
`DPU_IRQ_IDX()` value, print the same full value here for easier
correlation instead of only adding the `irq_idx / 32` part.

Furthermore, make the dbgstr messages more consistent.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index cf1b6d84c18a..64589a9c2c51 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -252,9 +252,9 @@ static int dpu_hw_intr_enable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
 
 	cache_irq_mask = intr->cache_irq_mask[reg_idx];
 	if (cache_irq_mask & DPU_IRQ_MASK(irq_idx)) {
-		dbgstr = "DPU IRQ already set:";
+		dbgstr = "already ";
 	} else {
-		dbgstr = "DPU IRQ enabled:";
+		dbgstr = "";
 
 		cache_irq_mask |= DPU_IRQ_MASK(irq_idx);
 		/* Cleaning any pending interrupt */
@@ -268,7 +268,7 @@ static int dpu_hw_intr_enable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
 		intr->cache_irq_mask[reg_idx] = cache_irq_mask;
 	}
 
-	pr_debug("%s MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", dbgstr,
+	pr_debug("DPU IRQ %d %senabled: MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", irq_idx, dbgstr,
 			DPU_IRQ_MASK(irq_idx), cache_irq_mask);
 
 	return 0;
@@ -301,9 +301,9 @@ static int dpu_hw_intr_disable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
 
 	cache_irq_mask = intr->cache_irq_mask[reg_idx];
 	if ((cache_irq_mask & DPU_IRQ_MASK(irq_idx)) == 0) {
-		dbgstr = "DPU IRQ is already cleared:";
+		dbgstr = "already ";
 	} else {
-		dbgstr = "DPU IRQ mask disable:";
+		dbgstr = "";
 
 		cache_irq_mask &= ~DPU_IRQ_MASK(irq_idx);
 		/* Disable interrupts based on the new mask */
@@ -317,7 +317,7 @@ static int dpu_hw_intr_disable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
 		intr->cache_irq_mask[reg_idx] = cache_irq_mask;
 	}
 
-	pr_debug("%s MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", dbgstr,
+	pr_debug("DPU IRQ %d %sdisabled: MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", irq_idx, dbgstr,
 			DPU_IRQ_MASK(irq_idx), cache_irq_mask);
 
 	return 0;
-- 
2.38.1