Re: [PATCH v1 4/8] arm64: dts: renesas: r8a779g0: Add display related data

From: Tomi Valkeinen
Date: Tue Nov 22 2022 - 03:35:26 EST


On 17/11/2022 17:03, Kieran Bingham wrote:
Quoting Tomi Valkeinen (2022-11-17 12:25:43)
From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>

Add DT nodes for components needed to get the DSI output working:
- FCPv
- VSPd
- DU
- DSI

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 129 ++++++++++++++++++++++
1 file changed, 129 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 45d8d927ad26..31d4930c5adc 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -1207,6 +1207,135 @@ prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
};

I think these nodes are supposed to be in sort order based on the
register address in memory.

Ah, I didn't realize that.

Disregarding sort order, I'll review the node contents.

I would probably s/data/nodes/ in $SUBJECT too.


+
+ fcpvd0: fcp@fea10000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea10000 0 0x200>;
+ clocks = <&cpg CPG_MOD 508>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ };
+
+ fcpvd1: fcp@fea11000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea11000 0 0x200>;
+ clocks = <&cpg CPG_MOD 509>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ };

I'm intrigued at the length of 0x200 as I only see 3 registers up to
0x0018 ..

But all existing platforms with fcpv* set 0x200 ... so lets cargo cult it up... :-)

+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x5000>;

"""
Below are the base addresses of each VSP unit. VSPX has 32Kbyte address
space. VSPD has 28Kbyte address space.
"""

Hrm : 28K is 0x7000

RPf n OSD CLUT Table: H’4000 + H’0400*n to H’43fc + H’0400*n

0x43fc+(0x400*5)
22524 [0x57fc]

So this needs to be /at least/ 0x6000 (Would 0x5800 be odd?) and perhaps as it clearly states
28k, we should just set it to 0x7000.

Ok. These are identical to v3u, and I was just copying v3u's dts, assuming they're correct. We probably should fix the v3u dts files too.


+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 830>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 830>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x5000>;

Same here of course (reg = <0 0xfea28000 0 0x7000>)


+ interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 831>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 831>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a779g0";
+ reg = <0 0xfeb00000 0 0x40000>;
+ interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 411>;
+ clock-names = "du.0";
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 411>;
+ reset-names = "du.0";
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_dsi0: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_dsi1: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi-encoder@fed80000 {
+ compatible = "renesas,r8a779g0-dsi-csi2-tx";
+ reg = <0 0xfed80000 0 0x10000>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 415>,
+ <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+ <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+ clock-names = "fck", "dsi", "pll";
+ resets = <&cpg 415>;

blank line here to separate it, and highlight that it's disabled? (Like
is done for DU?

Ok.

+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&du_out_dsi0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ dsi1: dsi-encoder@fed90000 {
+ compatible = "renesas,r8a779g0-dsi-csi2-tx";
+ reg = <0 0xfed90000 0 0x10000>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 416>,
+ <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+ <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+ clock-names = "fck", "dsi", "pll";
+ resets = <&cpg 416>;

Same.

With the VSPD register ranges increased accordingly:

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&du_out_dsi1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
};
timer {
--
2.34.1