Re: [net-next PATCH] octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (master)
by Paolo Abeni <pabeni@xxxxxxxxxx>:

On Fri, 18 Nov 2022 11:03:29 +0530 you wrote:
> 1. If a profile does not support DMAC extraction then avoid installing NPC
> flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
> supported by the profile then avoid installing broadcast and multicast
> rules.
> 2. Allow MCAM entry insertion for promiscuous mode.
> 3. For the profiles where DMAC is not extracted in MKEX key default
> unicast entry installed by AF is not valid. Hence do not use action
> from the AF installed default unicast entry for such cases.
> 4. Adjacent packet header fields in a packet like IP header source
> and destination addresses or UDP/TCP header source port and destination
> can be extracted together in MKEX profile. Therefore MKEX profile can be
> configured to in two ways:
> 	a. Total of 4 bytes from start of UDP header(src port
> 	   + destination port)
> 	or
> 	b. Two bytes from start and two bytes from offset 2
> 
> [...]

Here is the summary with links:
  - [net-next] octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules
    https://git.kernel.org/netdev/net-next/c/674b3e164238

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html