[PATCH 1/3] hwmon: (pmbus/core): Update regulator flag map

[Naresh Solanki]

Add regulator flag map for PMBUS status byte & status input.

Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
---
 drivers/hwmon/pmbus/pmbus_core.c | 52 +++++++++++++++++---------------
 1 file changed, 28 insertions(+), 24 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 20ca26e19db7..08f96e2b4837 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2756,26 +2756,47 @@ static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] =
 		.reg = PMBUS_STATUS_VOUT,
 		.bits = (const struct pmbus_regulator_status_assoc[]) {
 			{ PB_VOLTAGE_UV_WARNING, REGULATOR_ERROR_UNDER_VOLTAGE_WARN },
-			{ PB_VOLTAGE_UV_FAULT,   REGULATOR_ERROR_UNDER_VOLTAGE },
+			{ PB_VOLTAGE_UV_FAULT,	 REGULATOR_ERROR_UNDER_VOLTAGE },
 			{ PB_VOLTAGE_OV_WARNING, REGULATOR_ERROR_OVER_VOLTAGE_WARN },
-			{ PB_VOLTAGE_OV_FAULT,   REGULATOR_ERROR_REGULATION_OUT },
+			{ PB_VOLTAGE_OV_FAULT,	 REGULATOR_ERROR_REGULATION_OUT },
 			{ },
 		},
 	}, {
 		.func = PMBUS_HAVE_STATUS_IOUT,
 		.reg = PMBUS_STATUS_IOUT,
 		.bits = (const struct pmbus_regulator_status_assoc[]) {
-			{ PB_IOUT_OC_WARNING,    REGULATOR_ERROR_OVER_CURRENT_WARN },
-			{ PB_IOUT_OC_FAULT,      REGULATOR_ERROR_OVER_CURRENT },
-			{ PB_IOUT_OC_LV_FAULT,   REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_IOUT_OC_WARNING,	 REGULATOR_ERROR_OVER_CURRENT_WARN },
+			{ PB_IOUT_OC_FAULT,	 REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_IOUT_OC_LV_FAULT,	 REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_POUT_OP_FAULT,	 REGULATOR_ERROR_OVER_CURRENT },
 			{ },
 		},
 	}, {
 		.func = PMBUS_HAVE_STATUS_TEMP,
 		.reg = PMBUS_STATUS_TEMPERATURE,
 		.bits = (const struct pmbus_regulator_status_assoc[]) {
-			{ PB_TEMP_OT_WARNING,    REGULATOR_ERROR_OVER_TEMP_WARN },
-			{ PB_TEMP_OT_FAULT,      REGULATOR_ERROR_OVER_TEMP },
+			{ PB_TEMP_OT_WARNING,	 REGULATOR_ERROR_OVER_TEMP_WARN },
+			{ PB_TEMP_OT_FAULT,	 REGULATOR_ERROR_OVER_TEMP },
+			{ },
+		},
+	}, {
+		.func = -1,
+		.reg = PMBUS_STATUS_BYTE,
+		.bits = (const struct pmbus_regulator_status_assoc[]) {
+			{ PB_STATUS_IOUT_OC,	 REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_STATUS_VOUT_OV,	 REGULATOR_ERROR_REGULATION_OUT },
+			{ PB_STATUS_VIN_UV,	 REGULATOR_ERROR_UNDER_VOLTAGE },
+			{ PB_STATUS_NONE_ABOVE,  REGULATOR_ERROR_FAIL },
+			{ },
+		},
+	}, {
+		.func = PMBUS_HAVE_STATUS_INPUT,
+		.reg = PMBUS_STATUS_INPUT,
+		.bits = (const struct pmbus_regulator_status_assoc[]) {
+			{ PB_IIN_OC_FAULT,	 REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_VOLTAGE_OV_FAULT,	 REGULATOR_ERROR_OVER_VOLTAGE_WARN },
+			{ PB_VOLTAGE_OV_WARNING, REGULATOR_ERROR_OVER_VOLTAGE_WARN },
+			{ PB_VOLTAGE_UV_FAULT,	 REGULATOR_ERROR_UNDER_VOLTAGE },
 			{ },
 		},
 	},
@@ -2834,23 +2855,6 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
 		if (status & PB_STATUS_POWER_GOOD_N)
 			*flags |= REGULATOR_ERROR_REGULATION_OUT;
 	}
-	/*
-	 * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
-	 * defined strictly as fault indicators (not warnings).
-	 */
-	if (status & PB_STATUS_IOUT_OC)
-		*flags |= REGULATOR_ERROR_OVER_CURRENT;
-	if (status & PB_STATUS_VOUT_OV)
-		*flags |= REGULATOR_ERROR_REGULATION_OUT;
-
-	/*
-	 * If we haven't discovered any thermal faults or warnings via
-	 * PMBUS_STATUS_TEMPERATURE, map PB_STATUS_TEMPERATURE to a warning as
-	 * a (conservative) best-effort interpretation.
-	 */
-	if (!(*flags & (REGULATOR_ERROR_OVER_TEMP | REGULATOR_ERROR_OVER_TEMP_WARN)) &&
-	    (status & PB_STATUS_TEMPERATURE))
-		*flags |= REGULATOR_ERROR_OVER_TEMP_WARN;
 
 	return 0;
 }

base-commit: 2c71b3246ec3246522e8cb7c8191dc7a5d62cc70
-- 
2.37.3