[PATCH v1 3/5] ARM: dts: colibri-imx6ull: Disable usb over-current

[Philippe Schenker]

From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.

This will prevent the warning "No over current polarity defined" from
being printed on boot.

Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
---

 arch/arm/boot/dts/imx6ull-colibri-aster.dtsi   | 2 ++
 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 2 ++
 arch/arm/boot/dts/imx6ull-colibri-iris.dtsi    | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
index c9133ba2d705..de4dc7c1a03a 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
@@ -130,11 +130,13 @@ &uart5 {
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index e29907428c20..692ef26fbab3 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -106,11 +106,13 @@ &uart5 {
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
index 166a0aefc869..f52f8b5ad8a6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -117,11 +117,13 @@ &uart5 {
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
-- 
2.38.1