Re: [RESEND PATCH v2] arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon

[Matthias Brugger]

On 11/11/2022 10:55, Macpaul Lin wrote:
> The size of device tree node secmon (bl31_secmon_reserved) was
> incorrect. It should be increased to 2MiB (0x200000).
>
> The origin setting will cause some abnormal behavior due to
> trusted-firmware-a and related firmware didn't load correctly.
> The incorrect behavior may vary because of different software stacks.
> For example, it will cause build error in some Yocto project because
> it will check if there was enough memory to load trusted-firmware-a
> to the reserved memory.
>
> When mt8195-demo.dts sent to the upstream, at that time the size of
> BL31 was small. Because supported functions and modules in BL31 are
> basic sets when the board was under early development stage.
>
> Now BL31 includes more firmwares of coprocessors and maturer functions
> so the size has grown bigger in real applications. According to the value
> reported by customers, we think reserved 2MiB for BL31 might be enough
> for maybe the following 2 or 3 years.
>
> Cc: stable@xxxxxxxxxxxxxxx      # v5.19
> Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
> Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
> Reviewed-by: Miles Chen <miles.chen@xxxxxxxxxxxx>

Applied now to v6.1-next/fixes

Thanks!

> ---
> Changes for v2
>   - Add more information about the size difference for BL31 in commit message.
>     Thanks for Miles's review.
>
>   arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 4fbd99eb496a..dec85d254838 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -56,10 +56,10 @@
>   		#size-cells = <2>;
>   		ranges;
>   
> -		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> +		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
>   		bl31_secmon_reserved: secmon@54600000 {
>   			no-map;
> -			reg = <0 0x54600000 0x0 0x30000>;
> +			reg = <0 0x54600000 0x0 0x200000>;
>   		};
>   
>   		/* 12 MiB reserved for OP-TEE (BL32)