Re: [PATCHv3 7/9] arm64: dts: rockchip: Add rk3588-evb1 board

[Michael Riesch]

Hi Sebastian,

On 11/21/22 18:58, Sebastian Reichel wrote:
> From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> 
> Add board file for the RK3588 evaluation board. While the hardware
> offers plenty of peripherals and connectivity this basic implementation
> just handles things required to successfully boot Linux from eMMC,
> connect via UART or Ethernet.
> 
> Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> [rebase, update commit message, use EVB1 for SoC bringup]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3588-evb1-v10.dts     | 159 ++++++++++++++++++
>  2 files changed, 160 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 8c15593c0ca4..12ed53de11eb 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -72,3 +72,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> new file mode 100644
> index 000000000000..e6c5df2163ba
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3588.dtsi"
> +
> +/ {
> +	model = "Rockchip RK3588 EVB1 V10 Board";
> +	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
> +
> +	aliases {
> +		mmc0 = &sdhci;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	vcc12v_dcin: regulator-vcc12v-dcin {

I believe new regulator node names should have a "-regulator" suffix.

This comment also holds for the rock-5b patch.

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc12v_dcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc5v0_sys: regulator-vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		brightness-levels = <
> +			  0  20  20  21  21  22  22  23
> +			 23  24  24  25  25  26  26  27
> +			 27  28  28  29  29  30  30  31
> +			 31  32  32  33  33  34  34  35
> +			 35  36  36  37  37  38  38  39
> +			 40  41  42  43  44  45  46  47
> +			 48  49  50  51  52  53  54  55
> +			 56  57  58  59  60  61  62  63
> +			 64  65  66  67  68  69  70  71
> +			 72  73  74  75  76  77  78  79
> +			 80  81  82  83  84  85  86  87
> +			 88  89  90  91  92  93  94  95
> +			 96  97  98  99 100 101 102 103
> +			104 105 106 107 108 109 110 111
> +			112 113 114 115 116 117 118 119
> +			120 121 122 123 124 125 126 127
> +			128 129 130 131 132 133 134 135
> +			136 137 138 139 140 141 142 143
> +			144 145 146 147 148 149 150 151
> +			152 153 154 155 156 157 158 159
> +			160 161 162 163 164 165 166 167
> +			168 169 170 171 172 173 174 175
> +			176 177 178 179 180 181 182 183
> +			184 185 186 187 188 189 190 191
> +			192 193 194 195 196 197 198 199
> +			200 201 202 203 204 205 206 207
> +			208 209 210 211 212 213 214 215
> +			216 217 218 219 220 221 222 223
> +			224 225 226 227 228 229 230 231
> +			232 233 234 235 236 237 238 239
> +			240 241 242 243 244 245 246 247
> +			248 249 250 251 252 253 254 255
> +		>;
> +		default-brightness-level = <200>;
> +
> +		pwms = <&pwm2 0 25000 0>;
> +		power-supply = <&vcc12v_dcin>;
> +	};
> +};
> +
> +&gmac0 {
> +	phy-mode = "rgmii-rxid";
> +	clock_in_out = "output";
> +
> +	snps,reset-gpio = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	/* Reset time is 20ms, 100ms for rtl8211f */
> +	snps,reset-delays-us = <0 20000 100000>;

These three properties are deprecated according to snps,dwmac.yaml ->
the reset GPIO should be implemented in the Ethernet PHY node.

This comment also holds for the rock-5a patch.

Best regards,
Michael

> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gmac0_miim
> +		     &gmac0_tx_bus2
> +		     &gmac0_rx_bus2
> +		     &gmac0_rgmii_clk
> +		     &gmac0_rgmii_bus>;
> +
> +	tx_delay = <0x43>;
> +	rx_delay = <0x00>;
> +
> +	phy-handle = <&rgmii_phy>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	hym8563: rtc@51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-output-names = "hym8563";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hym8563_int>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-source;
> +	};
> +};
> +
> +&mdio0 {
> +	rgmii_phy: ethernet-phy@1 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0x1>;
> +	};
> +};
> +
> +&pinctrl {
> +	hym8563 {
> +		hym8563_int: hym8563-int {
> +			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	max-frequency = <200000000>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};