[PATCH] driver:mhuv2:Fix data mode rx startup problem

[xiaowu.ding]

From: Xiaowu Ding <xiaowu.ding@xxxxxxxxxxxxxxx>

When using the arm mhuv2 data transfer mode , sometimes the sender can
not send data anymore ,and sender will blocking because of receiver did not
clear the stat_clear.

The test scene:
A is sender(poll mode) ; B is receiver (interrupt mode)
When A send msg to B ,but B did not have register the mailbox . The B will
miss the message ,and will not clear the stat_clear. So the sender A will
 be send blocking status and can not send again anymore.

So the patch just clear the stat_clear within the rx startup function. Just
Drop the last message before receiver will not be ready for receiver .

Signed-off-by: Xiaowu Ding <xiaowu.ding@xxxxxxxxxxxxxxx>
---
 drivers/mailbox/arm_mhuv2.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mailbox/arm_mhuv2.c b/drivers/mailbox/arm_mhuv2.c
index a47aef8df52f..7aef458f0b18 100644
--- a/drivers/mailbox/arm_mhuv2.c
+++ b/drivers/mailbox/arm_mhuv2.c
@@ -327,6 +327,14 @@ static int mhuv2_data_transfer_rx_startup(struct mhuv2 *mhu,
 {
 	struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
 	int i = priv->ch_wn_idx + priv->windows - 1;
+	const int windows = priv->windows;
+	int j, idx;
+
+	/* clear the rx stat_clear */
+	for (j = 0; j < windows; j++) {
+		idx = priv->ch_wn_idx + j;
+		writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[idx].stat_clear);
+	}
 
 	/*
 	 * The protocol mandates that all but the last status register must be
-- 
2.17.1